| Product |
Application |
Water/ powder Ratio |
Consistency at 20°C |
Pot Life at 20°C |
Compressive Strength at 20°C, MPa, days |
Tonnes (Mg) required for 1m³ |
|
1 |
7 |
28 |
Rockbond Floor Levelling Compound (RB FLC)  |
To produce flat, even and smooth surfaces to concrete and concrete floors. To repair, re-surface and smooth damaged concrete floors, paths and steps. A quick drying underlayment to solvent based resin toppings, carpets and tiles. |
20% |
Fluid screed |
30 minutes |
25, (10MPa at 2 hours) |
25 |
35 |
1.750Mg. (25kg covers 5m² at 2.9mm) |
Rockbond Industrial Floor Screed (RB IFS)  |
To repair concrete floors, pathways, loading bays, car parks and roads. To protect concrete in chemically aggressive environments such as: chemical works and stores, food processing factories, breweries, dairies and farms. To produce flat, level, smooth and attractive surfaces whenever required. |
20% |
Fluid screed |
20 minutes |
20, (10 MPa at 2 hours) |
30 |
50 |
1.800Mg. (25kg covers 5m² at 2.8mm) |
Rockbond Heavy Duty Industrial Floor Screed (RB HDIFS)  |
In areas where there is heavy and frequent vehicular traffic. Industrial In heavy engineering and railway workshops and shipyards. To repair and protect concrete against loading buckets, shovels and grabs. |
13% |
Mobile screed |
20 minutes |
30, (12 MPa at 2 hours) |
50 |
70 |
1.900Mg. (25kg covers 2.5m² at 5.2mm) |
Rockbond Base Screed (RB BS) |
For use as and underlayment to floor toppings and coatings. For the placement of deep sections, and to increase floor levels. To fill and cover voids, crevices, holes, ruts and channels in concrete sub floors. |
12% |
Mobile screed |
20 minutes |
15 |
25 |
35 |
1.850Mg. (25kg covers 1m² at 13.5mm) |
Rockbond Floor Screed (RB FS)  |
To top concrete & cementitious floors, ramps, paths & roadways. In areas of high mechanical attack: engineering workshops and assembly plants. In chemically hostile areas: food factories, farms, abattoirs, dairies and breweries. |
10% |
Good screed |
30 minutes |
25 |
45 |
60 |
2.000Mg. (25kg covers 1m² at 12.5mm) |
Rockbond Speed Screed (RB SS) |
To repair and resurface concrete floors, steps, car parks, paths and roads. In loading bays, warehouse and factory floors that require early trafficking. A quick drying underlayment to solvent based resin toppings, carpets and tiles. |
10% |
Good Screed |
20 minutes |
20 (10MPa at 2 hours) |
40 |
50 |
2.100Mg. (25kg covers 1m² at 12.0mm) |
RockbondTop Floor Topping (RB RBTFT)  |
To top concrete in areas where there is frequent and heavy vehicular traffic. To produce non slip, non skid surfaces to steps, ramps, paths and roadways. In loading bays where fork lift traffic and heavy vehicles collect and manoeuvre. |
N/A |
N/A |
N/A |
N/A |
|
|
5kg/m² concrete surface |