| Product |
Application |
Consistency at 20°C |
Pot Life at 20°C |
Compressive Strength at 20°C, MPa, 28 days |
Spread rate |
|
Rockbond Epoxy Steel Primer (RB ESP) 
|
To protect steel from corrosion in chemically aggressive environments for durable reinforced concrete in chemical works, tunnels and sewers to protect steel against de-icing salts and seawater in marine locations.
|
Paint |
2 hours |
|
10m²/litre |
Rockbond Epoxy Bonding Agent (RB EBA) 
|
To bond wet or cured concrete to steel and other construction materials to bond precast concrete, stone, bricks, blocks and wood to concrete and steel to waterproof, seal and bond floor screeds to concrete and other surfaces. For use as a general purpose adhesive during building and construction.
|
Paint
|
30 minutes
|
50MPa
|
4 m²/litre
|
Rockbond Crack Injection T Grout (RB CITG) 
|
To penetrate, fill and seal cracks in concrete, rock, brick, block and masonry. As an adhesive to fill and seal gaps, joints and spaces between precast concrete to fill, seal and protect cracked concrete and porous cementitious surfaces.
|
thixotropic or free flow
|
4 hours |
50MPa
|
|
Rockbond Epoxy Lightweight Mortar (RB ELWM) 
|
For one off high build placement: 50mm on soffit and 75mm on vertical surfaces. Structural repairs to vertical and soffit concrete. Whenever a light weight, impermeable material is required. To patch repair and fill cracks, voids, holes and gaps in concrete and steel.
|
Stiff mortar
|
30 minutes
|
50MPa - 35MPa
|
|
Rockbond Epoxy (LM) Mortar (RB ELMM) 
|
For use in situations where a strong bonding, flexible material is required to fill cracks, voids, holes and gaps in concrete and steel exposed to movement due to moisture, heat, stress or vibration. As a joint filler in concrete floors, slabs, precast concrete and steel. |
Good mortar
|
30 minutes
|
15MPa - 17MPa |
|
Rockbond ResinTop Primer and Coating (RB RTP) (RB RTC) 
|
To install wearing surfaces to weak and friable concrete roads, paths and floors to fill, seal and protect cracked concrete and porous cementitious surfaces. For use in engineering workshops, railway yards, ship yards, aircraft hangers, factories and garages to produce attractive and ascetically pleasing finishes to floors and concrete surfaces.
|
Flowing Primer, Flowing Coating
|
30 minutes
|
|
4m²/litre Primer 2m²/litre Coating |
Rockbond Anchor T Resin Grout (RB ATRG) 
|
Soffit fixings in cement, concrete, brick, mortar, masonry, rock and stone. Installation of reinforcing starter bars, bolts and rods. Anchor systems for cables, bolts, plates and retaining walls. Fixings for scaffolding, crash barriers, safety rails and fences.
|
Thixotropic or Free flow
|
30 minutes
|
60MPa
|
|
|
Rockbond Tanking System Primer (RB TSP) and Coating (RB TSC) 
|
Tanking, roofing, waterproofing and weatherproofing applications to protect concrete in chemically aggressive environments such as marine defences, food processing factories, chemical works, abattoirs, dairies, breweries, sewers and farms. Non hazardous: formulated to BS 6920 for use in potable water environments.
|
Flowing
|
30 minutes
|
|
4m²/litre Primer 2m²/litre Coating |
Rockbond Anti Graffiti Primer (RB AGP)and Coating (RB AGC)
|
Can be pigmented to give a range of colours. Resistant to solvents and chemical attack. Formulated to withstand continual washing without ageing or deterioration to protect concrete structures and buildings against graffiti nuisance for use on bus shelters, toilets, bollards, barriers, signs and various street furniture.
|
Fluid Primer, Paint Coating
|
30 minutes
|
|
5m²/litre Primer 12m²/litre Coating |
Rockbond Epoxy Timber Mortar (RB TM) 
|
To replace and repair damaged, cracked or rotten timber to fill cracks, voids, holes, gaps and joints in wood and timber structures, patch repairs to wooden surfaces, walls, furniture and floors. To restore the structural integrity of wooden frames, beams, joists, pillars and posts.
|
Good Mortar
|
30 minutes
|
4.5MPa - 27MPa |
N/A |